Peachtree Doors and Windows

For Peachtree Command Sliding Patio Door 1968-1971Repairs the Adams Write handle set locking mechanism.Call for other parts for the Command Door handle set.

****Please note that these replacement locks have a redesigned internal plastic component that also requires changing the sash keeper, which is included with purchase.The replacement lock fits both left and right window lock locations> keeper part for the updated lock is dependent on window hinge orientation> exterior view> left or right.Handing is a required selection to determine the correct keeper.Take a look at the pictures above to help with your selection. ...

Applications: Crestline/ Vetter Casement Windows 1986- 2004 (312 & 112 Series) Peachtree Series 500/700 Casement Windows 2003-2013Restore your window operation with a set of replacement hinges. Over time the plastic slide shoe deteriorates causing the sash to sag and drag on the frame when closing. ***Note- These hinges do NOT fit any awning window application [too short/ small]. Call for specific awning hinge parts. Casement Window Hinge Selection Please select left or right hinge direction....

Hoppe Hardware Single Point Gear Box - 1 3/4" Backset*** This lock mortise contains a single latch and deadbolt assembly. Note** The lock mortise cannot be used to repair a multi point Hoppe system. ***Backset is measured from the latch edge of the mortise to the center of the handle- check this before ordering*** DO NOT TAKE THE MORTISE LOCK BOX APART. There are NO customer serviceable parts inside this mortise lock box. ANY alteration or diss-assembly of the mortise lock voids any return...

Hoppe Hardware Single Point Gear Box - 1 3/8 Backset*** This lock mortise contains a single latch and deadbolt assembly. Note** The lock mortise cannot be used to repair a multi point Hoppe system. ***Backset is measured from the latch edge of the mortise to the center of the handle- check this before ordering*** DO NOT TAKE THE MORTISE LOCK BOX APART. There are NO customer serviceable parts inside this mortise lock box. ANY alteration or diss-assembly of the mortise lock voids any return...

Multi-Use Weather Strip 2" x 1" Self Adhesive Brush Pile PadMany uses - Non Tilt Double Hung Window, Entry Door, Patio Door, Weather Strip, etc.

Stainless repair track overlay to correct damaged sill sliding door track extrusion.Sill track may require alterations for proper repair track fit. This part is 72".Sill track repair cover lengths up to 94" Call for the price on the 94" length.[Over size shipping price will apply] Actual part length will be up to 2" longer. Overlay can be used for many applications.Use on the Peachtree Carvel Sliding Patio Door

Stainless repair track cap to correct damaged sill sliding door track extrusion. Sill track may require alterations for proper repair track fit. Place over the existing track and crimp to attach. Sill track repair cover lengths up to 94" Select 72" on the web site or call for the price on the 94" length.[Over size shipping price will apply]. Actual part size is 1/4" x 1/4" Track cap can be used for many applications, panel or screen track repair ...

Peachtree & Crestline Vinyl Window Sash LockFits both the Peachtree & Crestline 200, 250 & 300 Series Vinyl Window units.Locks are not handedAvailable in white finish only.Use with keeper- SKU: 02182012-1

Applications: Peachtree Image/ Aspire Double Hung Sash Weather Strip.Peachtree Ariel Double Hung Lower Sash Rail, 1993-1995 with kerf insert channel Crestline Double Hung.[pre 1992] This foam filled "barb edge" weather strip is used on the lift rail of the lower & upper sash. It is an upgrade to the hollow bulb original type> tightens the window unit vertically when setting the sash lock. Sold in 36" sections. Available in 1/4" bulb [tan] Crestline or 7/16" [grey] Peachtree Image. ...

Peachtree Awning Window> Fits Model years 1982-2003 NOTE fits 5/16" Operator Shaft [Peachtree Awning Window Only]Crestline Casement & Awning Window Operator 1981-current

Peachtree Awning Crank Handle - driftwood color shownHandle is specific to the Peachtree Awning Window [5/16" shaft] and will not fit the Peachtree Casement Window operator 9/32" shaft].